Visi (27)

£75.00

The Rapid Deploy cameras transmit directly to the Rapid Deploy receiver which plugs directly into the USB of your compatible Zip DVR or NVR.

£130.00

Wireless - No Cables - No Mess Battery Powered - Fast & Flexible Batteries are Rechargeable Spare Batteries for Swap Over PIR Saves Power & Starts Recording 200M Range for Larger Sites & Buildings Up to 12 Months Battery Standby Around 2-3 Weeks Battery Typical Use 2-Way Audio - Listen & Talk Back IR Night Vision CCTV on Mobile Phone or PC The Rapid Deploy CCTV system is a fast and easy solution to provide CCTV protection to sites with minimum mess or disruption. How does it work? The Rapid Deploy CCTV system consists of a 4Ch wireless receiver that simply plugs into a Zip NVR or DVR via its rear USB port. Once the wireless receiver is plugged into the Zip NVR or DVR it enables it to see and record the wireless Rapid Deploy CCTV cameras. Being wireless and battery powered the Rapid Deploy cameras are fast and easy to fit. The impressive 200m range means you can use them on building sites, garages, sheds, storage yards or similar applications. A built-in PIR means the Rapid Deploy cameras only transmit the video when they are activated, saving power and providing ":event only" recording thus extending battery life. If you want to see the live images from a camera on a phone or computer when you select the camera, the NVR/DVR receiver sends a signal to the camera to "wake" it up to allow viewing. Continuous 24/7 recording is also possible but requires powering the cameras with a permanent 5V supply, so they don't sleep and to preserve battery life. The feature packed Rapid Deploy cameras also boast built-in IR night vision along with a microphone, so you can see and hear what's happening, and a built-in speaker so you can even talk back to site from a mobile phone or PC. Powered by a quality rechargeable Lithium Ion slot-in powerpack, on standby waiting for the PIR to wake them and record, the battery can last well over a year! For a typical installation with semi-frequent activations, the battery life is typically 2-3 weeks but completely depends on how often it is triggered by the PIR. Spare batteries are available and it is recommended using these so the batteries can be swapped at pre-defined intervals when used to protect building sites and similar temporary installations. The power-packs are 5V and made to be charged from any mobile phone type Micro USB charger, so it's easy for users and installers to always have a charger at hand. The Receiver is a 4Ch unit so it can work with up to 4 Rapid Deploy cameras. Because the Rapid Deploy cameras are IP CCTV cameras, they use 1 IP channel on the DVR or NVR for each Rapid Deploy camera. Zip DVRs have a min of 2 IP channels (some 4) so even the Zip DVR can use the Rapid Deploy as a bolt on. White Rapid Deploy cameras are made of tough ABS and the black Rapid Deploy cameras are made of metal for more robust usage, both can be used internally or externally.

£130.00

Wireless - No Cables - No Mess Battery Powered - Fast & Flexible Batteries are Rechargeable Spare Batteries for Swap Over PIR Saves Power & Starts Recording 200M Range for Larger Sites & Buildings Up to 12 Months Battery Standby Around 2-3 Weeks Battery Typical Use 2-Way Audio - Listen & Talk Back IR Night Vision CCTV on Mobile Phone or PC The Rapid Deploy CCTV system is a fast and easy solution to provide CCTV protection to sites with minimum mess or disruption. How does it work? The Rapid Deploy CCTV system consists of a 4Ch wireless receiver that simply plugs into a Zip NVR or DVR via its rear USB port. Once the wireless receiver is plugged into the Zip NVR or DVR it enables it to see and record the wireless Rapid Deploy CCTV cameras. Being wireless and battery powered the Rapid Deploy cameras are fast and easy to fit. The impressive 200m range means you can use them on building sites, garages, sheds, storage yards or similar applications. A built-in PIR means the Rapid Deploy cameras only transmit the video when they are activated, saving power and providing ":event only" recording thus extending battery life. If you want to see the live images from a camera on a phone or computer when you select the camera, the NVR/DVR receiver sends a signal to the camera to "wake" it up to allow viewing. Continuous 24/7 recording is also possible but requires powering the cameras with a permanent 5V supply, so they don't sleep and to preserve battery life. The feature packed Rapid Deploy cameras also boast built-in IR night vision along with a microphone, so you can see and hear what's happening, and a built-in speaker so you can even talk back to site from a mobile phone or PC. Powered by a quality rechargeable Lithium Ion slot-in powerpack, on standby waiting for the PIR to wake them and record, the battery can last well over a year! For a typical installation with semi-frequent activations, the battery life is typically 2-3 weeks but completely depends on how often it is triggered by the PIR. Spare batteries are available and it is recommended using these so the batteries can be swapped at pre-defined intervals when used to protect building sites and similar temporary installations. The power-packs are 5V and made to be charged from any mobile phone type Micro USB charger, so it's easy for users and installers to always have a charger at hand. The Receiver is a 4Ch unit so it can work with up to 4 Rapid Deploy cameras. Because the Rapid Deploy cameras are IP CCTV cameras, they use 1 IP channel on the DVR or NVR for each Rapid Deploy camera. Zip DVRs have a min of 2 IP channels (some 4) so even the Zip DVR can use the Rapid Deploy as a bolt on. White Rapid Deploy cameras are made of tough ABS and the black Rapid Deploy cameras are made of metal for more robust usage, both can be used internally or externally.

£125.00

Enjoy high-quality video chat with visitors and keep an eye on what's happening at your front door right through your phone. The DB1C is a powerful video doorbell with built-in artificial intelligence capability. Features: 1080P 170° Vertical Field of View AI-Powered Person Detection 4 GHz & 5 GHz Dual Band Wi-Fi Two-Way Talk Night Vision up to 5m (16 ft.) 265 Video Compression Supports MicroSD Card up to 256 GB

£49.00

Small Motion Auto Tracking PTZ IP wifi Camera 3.0 Megapixel Dual Stream: 3MP/D1 IR LED: 6pcs, IR Range: 10M Lens: 3.6mm Pan: 0° - 355°, Tilt: 0° - 120° Video Output: 1 x RJ45 port, TF Card slot , upto 128G Support email alert trigger by Motion detection PNP(Plug and Play), support smart phone & tablets Two-way Audio, H.264 video compression, app (IC See) OSD, Motion Detection, Remote View and Control Wifi connect by scan QR codes, smart key easily, radar scanning Built in PIR Alarm, Push alarm to smart phone or CMS Working Temperature: -10℃~ +60℃ Size: 185mm x 160mm x 130mm Power: 5V 1000MA power adapter include Weight: 1500g Super camera at low cost!

£149.00

Wireless, Outdoor, Battery Powered Smart Home Camera with Magnet Bracket Wireless Battery Camera (Outdoor IP65) PNP (Plug and Play) support smart phone & tablets Push video to smart phone, two way audio Low power consumption, up to 6 months endurence [dependant on usage] IR Range: 10m LED: 2 pcs IR LEDs 1 pc white led Lens: 2.8mm wide angle lens Motion detection by PIR Sensor Supports SD Card up to 128GB WiFi auto match, mobile app (Vicoo) support iPhone and Android Power: 2×21700 battery (totally 10,000 MA) or hardwire (5V USB cable) Easycharge by USB cable Size: 84(L)mm x 62(W)mm x 92.5mm(H) Weight: 1500g Included: 32G SD Card, one pair TSLA 21700 Battery (totally 10,000MA) IP65 dustproof and waterproof design for convenient installation Bracket with 1/4 universal screw and magnetic bracket supported Tested and highly recommended. Fast and easy connection. Easy to install and use Clear and smooth video browsing; intelligent transmission giving full play to capabilities of the network Online firmware upgrade, and synchronous updating of the functions and experience Standard H.265 video compression algorithm enabling the transmission of high-definition videos in networks with narrow bandwidth; local high-definition videos with high image quality and low stream supporting smoother presentation without ghosting Two-way voice intercom supported; echo eliminated; noise suppressed. Compatible with Android; remote real-time monitoring supported with the IOS intelligent terminal 2 megapixel high resolution (1920 x 1080) for clear picture quality Dual-source lighting for night vision (night vision distance = 7m) comprising infrared lamp / white-light source; color images available for night vision. The built-in rechargeable lithium battery with long battery life functions for up to 6 months under normal circumstances and can stand by for 12 months. 2.4G Wi-Fi supported (IEEE802.11b/g/n) The image automatically flips with the installation direction of the device (G-SENSOR) Cloud storage, micro SD card (up to 128GB) and mobile phone video recording supported QR code intelligent connection and network allocation supported Supporting human contour detection, activity zone, intelligent push and pet snapshot IP65 dustproof and waterproof design for convenient installation; bracket with 1/4 universal screw and magnetic bracket supported

£99.00

Waterproof IP66 Metal WiFi Camera 2 megapixel resolution Image Resolution: Max: 1920 x 1080 Dual Stream: 1080P/D1 IR Range: 30m IR LED: 14μX18pcs Lens: Fixed 3.6mm 2 way audio Video Output: 1 x RJ45 port, TF Card slot, upto 128GB Support email alert trigger by motion detection PNP (Plug and Play), supports smart phone & tablets H.265 video compression Mobile app - IC See OSD, Motion Detection, Remote View and Control AI humanoid detection Area detection WiFi connect by scan QR codes, smart key easily, radar scanning Cloud storage Push alarm to smart phone Working Temperature: -10℃~ +60℃ Size: 183mm x 68mm x 58mm Weight: 1000g Support wireless WiFi and AP hotspot/bringing network port wired connection/3DB single antenna transmission signal Use DC12V 1A international standard power supply - Included TF card supports up to 128GB H.265X technology to double storage Two-way voice intercom, mobile alarm information push, use APP WeChat login Mobile alarm information sensitive push; alarm information WeChat direct push (subsequent upgrade) LED18 light infrared night vision is clearly visible APP link matching can be added in less than 20 seconds CMS computer client save and play in real time ONVIF protocol for connecting to NVR recorder Default network mode matching is added, standard pickup and speaker sound playback

£650.00

30 Ah chargeable lithium battery for use with DS-2XS6A87G1-L/C32S80 Battery Dimension: 236 × 154 × 80 mm (9.29" × 6.06" × 3.15") Battery Type Lithium Battery Voltage 10.8 V Capacity 30 Ah Max. Charging Voltage 12.6 V Weight Approx. 3.3 kg (7.3 lb.) Material Housing: Aluminum Alloy Protection IP68 (1.5 m, 72 h) Heater Yes

£999.00

**Battery Sold Sepatately** It can be used in the areas that are not suitable for laying wired network and electric supply lines, or used for the scenes that feature tough environment and have high demanding for device stability. It can be used for monitoring the farms, electric power cables, water and river system, oil pipelines and key forest areas. It also can be used in the temporary monitoring scenes, such as the large-scale competitions, the sudden public activity, the temporary traffic control and the city construction. Hikvision ColorVu technology provides 24/7 vivid colorful images with F1.0 advanced lenses and high performance sensors. F1.0 super-aperture collects more light to produce brighter images. Advanced sensor technology can vastly improve the utilization of available light. Empowered by deep learning algorithms, Hikvision AcuSense technology brings human and vehicle targets classification alarms to front- and back-end devices. The system focuses on human and vehicle targets, vastly improving alarm efficiency and effectiveness. 8MP high resolution 2.8mm fixed lens Full time colour Triple stream Up to 30m White light H.265+ compression 6 analytics IP67 weatherproof 120dB wide dynamic range Supports on board storage (up to 256GB) 80W photovoltaic panel, 30 Ah chargeable lithium battery (The battery should be ordered separately.) Support battery management, battery display, battery high-low temperature protection, charge-discharge protection, low-battery sleep protection and remote wakeup LTE-TDD/LTE-FDD/WCDMA/GSM 4G wireless network transmission, support Micro SIM card 12V DC

£79.00

A Full HD 1080p Wi-Fi camera with a magnetic base, designed for simple and quick installation 2MP Night Vision up to 10m (33ft) Supports 2.4GHz WiFi Three Sound-Alert modes Sleep Mode Two-Way Talk H.265 Video Compression Supports MicroSD Card Storage (up to 256GB) CloudPlay Storage

£99.00

The RoomWatchTM IP CCTV camera can be used on its own with no NVR or DVR, as a fantastic CCTV starter system. It comes with free phone and tablet apps along with Windows PC software. On your phone you can see live CCTV with sound from the camera, you even have the ability to talk back through your phone and the sound is played through the RoomWatch’s built-in speaker. You can install a Micro SD card in the RoomWatchTM so that it can record and store video & sound that you can then replay on your phone, tablet or PC remotely. Recording can be 24/7 continuous, movement activated by its built-in PIR, or even sound activated to see what really went bump in the night! Using the phone app you can even switch on the built-in white light LED to illuminate a room, or sound an alarm to warn off intruders. Flexible powering from 12V or a PoE network and with built-in WiFi connectivity, it really is fast and easy to set up with the popular QR code method. You can add additional RoomWatchTM cameras to a building for a more comprehensive system and even connect them to a Zip NVR or DVR for a more conventional CCTV system, with longer term recordings and a wider choice of cameras.

£495.00

The Ajax Home Intruder Alarm Kit is a full intruder alarm kit in one box, with all devices seamlessly managed by a central Hub 2 with LAN and 2G Dual Sim. The kit features a DoorProtect wireless opening detector that notifies of first signs of room intrusion by means of a broken door or window. StreetSiren Double Deck needs less than a second to activate a powerful siren and bright LED indicators in response to an alarm signal. With MotionCam, you’ll know about the situation before the burglars understand that they’re busted. An animated series of photos follows the instant motion alarm. Grade 2 Security Cetification EN50131 The kit consists of; 1 x Hub2 2 x MotionProtect 1 x DoorProtect 2 x SpaceControl 1 x Street Siren DD 1 x Home Siren